The feet and accessories on this page can be used on machines that have a front load bobbin system. They are suitable for models that take either clip-on or screw-on presser feet, as shown in the diagram where the distance from the presser foot thumb screw to the sole of the foot is roughly 2cm / ¾ "

All feet below are screw-on type

Low Reach Zig Zag Foot

(B66)

The Low Reach Zig Zag Foot is a metal screw on foot that will fit most machines 5mm width.

£9.00

Clear View Foot

(B301)

For optimum visibility when sewing. Ideal for top stitching, patchwork, piecing ect.

£9.00

Roll Hem

(B300)

Produce a roll and shell edge on soft light to medium fabrics.

£9.00

Freehand Foot

(B318)

Spring loaded clear foot 'hops' during sewing, allowing you to move the fabric. Ideal for freehand quilting and embroidery, monogramming etc.

£10.00

5 Groove Pintuck Foot

(B545)

This presser foot has 5 grooves and produces perfect pin tucks and corded pin tucks using a twin needle on lightweight fabric.

£9.00

Cording Foot

(B453)

Stitch down 1, 2 or 3 cords to make decorative braid and other embroidery effects.

£9.00

Fringe Foot

(B454)

Stitch down 1, 2 or 3 cords to make decorative braid and other embroidery effects.

£9.00

Overlock Foot

(B450)

Use with your machine's zigzag and oversew stitches to make guiding easier and prevent fabric edge from curling.

£9.00

Button-sew Foot

(B405s)

Sew on buttons, snaps, hooks & eyes with this handy little foot.

£9.00

Gathering Foot

(B367)

Gathers lightweight fabrics and can also gather one layer and stitch to another in one operation.

£9.00

Blind Hem Foot

(B302)

The adjustable guide helps produce more accurate blind hemming and is also ideal for edge stitching.

£9.00

Walking Foot

(JF)

Helps prevent fabric layers from shifting and slipping. Essential for quilting, sewing velvets, matching plaids, stretch fabrics, plastics and leather etc.

£25.00

1/4" Foot

(B330)

For a perfect ¼" seam. Just guide the fabric down the edge of this foot. Also has ¼" markings in front and behind the needle for stopping, starting and turning corners.

£14.95

Adjustable Zip and Piping Foot

BEST SELLER

(B65)

Narrow foot ideal for accurate zipper insertion and a must when piping with small, large or jumbo piping cords. The sole of the foot is easily adjusted so you can get the needle right up close to your zip or piping cord.

£9.00

Concealed Zip Foot

(B319)

Sew concealed zips with this nifty little foot. Its special rollers ease the zip's teeth to one side as it is stitched into place.

£9.00

Low Reach Buttonhole Foot

(B299)

The Low Reach Buttonhole Foot is a screw on foot which is suitable for most machines. There are markings on the side of the foot so that you can make a buttonhole to the exact size for your button.

£9.00

Low Reach Roller Foot

(B452)

The Low Reach Roller Foot is a screw on clear plastic foot suitable for most machines.
The metal rollers on the foot make sewing on fabrics like pvc,soft leather,velvet,moleskin etc, so much easier, the foot will simply glide over the fabric!

£9.00

Open toe foot

The open toe gives greater visibility and is ideal for applique and other crafts

(B546)

£9.00

Low Reach Adjustable

Zip/Cording/Piping Foot

(JAN)

The Low Reach Adjustable Zip/ Cording/Piping Foot is an all metal foot suitable for most makes of machines.This foot has the benefit of a three needle position,center ,left and right making it suitable for sewing very close to your chosen piping cord, giving you a very neat seam.

£13.00

Low Reach Teflon Zig Zag Foot

(B197)

The no-stick Teflon coating is the key to sewing temperamental fabrics like vinyl, synthetic leather, etc. The foot just glides across the surface. This makes it ideal for directional feeding, too.

£9.00

Low Shank 1/8 Inch Piping Foot

Centre Needle Position

(B219)

Industrial type piping foot for domestic low shank machines, with centre needle position

£13.50

Low Shank 1/4 Inch Piping Foot

Centre Needle Position

(B195)

Industrial type piping foot for domestic low shank machines, with centre needle position

£13.50

Low Shank 3/16 Inch Piping

Foot Centre Needle

Position

(B196)

Industrial type piping foot for domestic low shank machines, with centre needle position

£13.50